Operation
Press on the LED push button unit (6) to switch on
respectively off the LED light.
To write, simply pull back the protection cover (8) from
the ball pen and put it on the back barrel (7).
If not in use, always put the protection cover (8) onto the
front barrel of the ball pen to prevent the pen refill from
running dry.
Exchanging the Ballpoint Pen Refill
Turn the back barrel (7) from the ball pen.
Then turn the ballpoint pen refill (2) counter clockwise
from the front barrel (1).
A spare pen refill set is available from Westfalia under
Art. 83 61 56.
Exchanging the Batteries
Turn the back barrel (7) from the ball pen.
Pull the LED push button unit (6) out of the battery
compartment (4).
Insert three new batteries of the type AG3 with the plus
pole (+) first into the battery compartment.
Reassemble the ball pen in reverse order.
Operation
VIII