HoMedics UV CLEAN SAN-W100 Manuel D'instruction Et Information Sur La Garantie page 8

HOW TO USE
1. Remove cover (Fig. 1).
2. Pop up (Fig. 2).
3. Press power button (Fig. 3).
4. Within 10 seconds of pressing the power button, press and hold both side
buttons (Fig. 4).
5. Wave wand over any surface or object to sanitize; side buttons must be
pressed in to sanitize (Fig. 5).
6. LED light ring will flash blue during the 1-minute sanitization cycle. To run
another cycle, repeat steps 3-5.
Both side buttons must be pressed during the entire sanitizing cycle. If you
release either side button, the wand will turn off.
Slowly sweep the wand over any surface or object for maximum sanitization.
Always use the sanitizing wand facing the surface or object that you wish
to sanitize. Do not shine it into the air or toward yourself, other humans or
animals.
UV-C light is harmful to the eyes and skin. Avoid direct exposure.
Fig. 1
Fig. 4
EN
Fig. 2
Fig. 5
8
Fig. 3