Amann Girrbach ceramill therm Mode De Fonctionnement page 20

gB
selectIng anD startIng a PrOgraMMe
After the furnace has been switched on
Standby „ready"
Call up the menu
Select the programme
Confirm the programme
20
Wait for standby (approx. 10 sec)
Start the programme (press the key for approx.
2 seconds)
Programme is running, actual and target
temperatures are displayed.
_ The furnace can only be started from the
standby "rdy" mode!
_ The selected programme needs to be confirmed
by activating the Menu key % ; otherwise, it
will not be accepted!
_ Even after the mains switch ! has been
activated, a selected programme is still saved
and can be started directly from the standby
mode.
_ The controller automatically returns to the
standby mode after 10 seconds.
_ After starting the programme, the status
indicator LED programm * lights perma-
nently until the programme is terminated.