Stand Assembly - Brandson Equipment 305022 Mode D'emploi

11 Nut for stand
12 Stand mounting screw
13 Height adjustment
5. Assembly
Take the fan out of the package and check the appliance as well as the scope of
delivery mentioned in the table above. Please contact the supplier if any part is
missing or has been damaged.

5.1 Stand assembly

Align the stand (10) and the stand rod (9) and fasten them using the stand nut
(11) and the stand mounting screw (12).
Ensure correct
insertion
¢
5.2 Assembling the motor unit to the stand
7
English
11
9
10
First align the motor rod (7) with the hole position of the
stand assembled earlier (see 5.1 Stand assembly). Then
rotate it clockwise to fix the motor unit to the stand.
12
27