Important - Brentwood Appliances MPI-59R Consignes De Sécurité Et De Fonctionnement

Parts:
K. Non-Stick Plate
with Steam Vents
L. Filler Cap
J. Max Filling
level
H. Thermostat
Dial
I. Transparent
Water Tank
Before First Use
IMPORTANT: Please check all packaging material carefully before discarding
as there may be accessory parts contained within the packaging material.
1. Use the lowest temperatures with fabrics that have unusual finishes such as
sequins, embroidery, flush, etc...
2. We recommend passing the iron over an ordinary cloth before using it for
the first time.
3. If the fabric is mixed, set the thermostat to the temperature of the fiber
requiring the lower temperature.
4. If you do not know the composition of the fabric, try testing on a hidden
corner of the garment. Start with a low temperature and increase it gradually
until it reaches the ideal temperature.
5. Never iron areas with traces of perspiration or other marks. The heat of the
plate fixes the stains on the fabric making them irremovable.
Attention: First use may cause a slight odor or small smoking upon
heating, it is normal. This is a result of the heating element chemical
reaction. It quickly goes away.
Identifying your Garment:
GARMENT LABEL FABRIC TYPE
4
A. Spray
Vent
B. Steam
Dial
C. Shot
Steam Button
D. Spray
Button
E. Handle
G. Retractable
Cord Button
F. Supply Cord
and Plug
THERMOSTAT REGULATION