Atex Units - Eaton XB11 Manuel Technique

The IECEx certificate and product label carry the IECEx
equipment protection level marking.
Gb
Db
Where Gb signifies suitability for use in a Zone 1 surface
industries area in the presence of gas.
Where Db signifies suitability for use in a Zone 21 surface
industries area in the presence of dust.

ATEX units

Certified to: EN60079-0, EN60079-1 and EN60079-31
Ex d unit (ATEX certification No. BAS99ATEX2195)
Ex d IIB Tx (Tamb.) Gb
Ex tb IIIC Tx (Tamb.) Db IP66/IP67
Gas T-rating (Tx) Dust T-rating (Tx)
T4 T105°C
T5 T90°C
T6 T75°C
The ATEX certificate and product label carry the ATEX
group and category marking:
II 2 GD
Where:
Signifies compliance with ATEX
II Signifies suitability for use in surface industries
2 Signifies suitability for use in a zone 1 area
G Signifies suitability for use in the presence of gases
D Signifies suitability for use in the presence of dust
The ATEX certificate and product label also carry the
following mark:
This signifies unit compliance to the relevant European
directives, in this case 94/9/EC, along with the number
of the notified body issuing the EC type examination
certificate.
The ATEX and IECEx units also have the following EMC
approvals
Conducted Emissions (DC) to EN61000-6-3:2007
Radiated Field Immunity (DC and AC) to
EN61000-6-2:2005/IEC61000-4-3:2002
Electrical Fast Transients/Bursts (DC and AC) to
EN61000-6-2:2005/IEC61000-4-4:2004
Surge Immunity (DC and AC) to EN61000-6-2:2005/
ambient temp
range (Tamb.) IEC61000-4-5:1995 + A1:2000
(-55°C to +70°C)
Dips and Interruptions (AC) to EN61000-6-2:2005/
(-55°C to +55°C)
IEC61000-4-11:2004
(-55°C to +40°C)
Xenon beacon Xb11 TM135 February 2023 www.eaton.com
1180
Xenon beacon XB11
English
3