Start/Pause Button; Cycle Status Indicators - Haier GWT480BW Guide De L'utilisateur

CYCLE sELECTIon KnoB
•
Turn the washer on by rotating the Cycle Selection Knob.
noTE: If you turn the Cycle Selection Knob to select a wash cycle, but do not
press the START/PAUSE BUTTON within 5 minutes, the washer will turn off
automatically.
•
There are 5 cycles to choose from:
Whites - Use this cycle for heavily soiled durable white fabrics.
Heavy Duty - Use this cycle for heavily soiled durable garments. This cycle
can also be used for towels, sports gear, children's clothes, etc.
normal - Use this cycle for normally soiled cottons and mixed fabric loads.
Perm Press - Use this cycle for wrinkle-free clothing, cotton/poly blend
fabrics, and dress shirts and pants.
Delicate - Use this cycle to wash lightly soiled garments and delicate clothes
that need gentle washing.
•
There are also 2 specialty cycles to choose from:
Rinse & spin - Use this cycle to relax wrinkles, remove excess detergent, and
refresh clean garments.
Spin Only - Use this cycle to remove water from clean clothes. For certain
delicate and cotton clothes that you do not wish to put into the dryer, this is
an ideal cycle.

sTaRT/PaUsE BUTTon

•
Press this button to start a selected cycle or to pause an operating cycle.
noTE: After starting a wash cycle, you must pause the operating cycle to
change options or settings.
LoaD sIZE BUTTon
•
Use this button to select an appropriate water level for your load. Small is
the lowest water level and Super is the highest.

CYCLE sTaTUs InDICaToRs

•
When the washer is first powered on, the Cycle Status lights indicate the
stages of the selected cycle.
•
As the washer is operating, the indicator for the current stage of the wash
cycle blinks. As each stage of the wash cycle is completed, the indicator light
turns off and the light for the next stage begins to blink.
•
The entire wash cycle is complete when all of the lights turn off.
13