Care And Cleaning - LUND Interceptor 18832 Instructions De Montage

Installation Steps
Slide each end bracket over hood edge, ensuring that each is centered on the protective film previously installed.
9
Turn both of the hood bumpers counter clock-
wise 1 1/2 turns.
10
Apply (4) bump ons to surface of hood.
12

Care and Cleaning

•
Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Lund ® branded products offered by Lund International, Inc. We take the utmost pride in
our products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product
is top quality in terms of fit, durability, finish and ease of installation.
™
NOTE: Actual application may vary slightly from illustrations.
bracket
protective film
hood
800-241-7219 • Visit us at lundinternational.com
© 2015 Lund International, Inc. All rights reserved.
Lund and the Lund logo are trademarks of Lund International, Inc.
® ®
11
Lund International
Page 3 of 3
Adjust as needed.
Close Hood.