Interior Cleaning; Vent Cleaning - HJC CL-Y Manuel D'utilisation

12
12
7
Shell Cleaning
1. Please clean helmets from dust, bugs or grass within one day.
Cleaning progress
1) Clean the helmet with warm water and cloth.
2) If there are any remains left, dry the helmet and remove any remaining contamination with rubber eraser.
※ Do not use any alcohol or thinner to clean the helmet because they may damage the paint.
2. Avoid oil contamination as it is extremely difficult to clean once exposed.

Interior Cleaning

Although we recommend changing a helmet every 3 to 5 years, the accumulation of sweat, humidity and dirt can
deteriorate the fabric and stitching and this may cause odor. To wash HJC removable pads, hand washing is
11
recommended. If you use a washing machine, please use on "Delicate" setting and air dry. HJC do not recommend
using spin-dryer for the interior pads as it may damage the material. For non-removable interiors, HJC recommends
using anti-bacteria and mildew eliminating products such as "Helmet Fresh." or other similar product.

Vent Cleaning

Shield Cleaning
The helmet shield is made of polycarbonate materials with a polyurethane abrasion resistance coating. It should
be cleaned using mild soap and warm water. Never use hot water, salt water, benzene, thinner, gasoline or any
other harsh agents. Additionally the use of commercial shield cleaners is not recommended because they may
affect the quality of the shield material. Treat carefully when cleaning the shield to preserve the abrasion resistant
coating. When deep scratches are visible, it is highly recommended that the helmet shield be replaced. Tinted
shield are for "Day time use only" and are not suitable for use at night or in conditions of poor visibility.
Hold the clip and pull
Clip
the chin strap as directed
above to adjust the fit.
8