Suntec Wellness KLIMATRONIC Heat PTC 500 plug-in Mode D'emploi page 11

The appliance is equipped with an overheating protection. If the appliance turns off automatically
o
due to this safety measure, remove it from the power supply and let it cool down at least 30 min.
Overheating may be caused by blocked ventilation parts. Remove any obstruction before
o
turning the appliance back on.
Cleaning
•
Always disconnect the appliance from the power outlet and let it cool before cleaning. Never immerse
the appliance in water to prevent electric shocks.
•
Wipe over the exterior of the appliance with a soft, lint-free and slightly damp cloth; wipe dry with a dry
cloth. If required, a small amount of detergent can be used.
•
Please do not use any chemicals or other abrasive cleaning solvents to clean.
•
Please do not use any aggressive or chemical cleaning agents or abrasive cleaning agents such as
steel wool.
•
To remove any dust particles from the ventilation parts, you can use a vacuum cleaner.
•
Always make sure that the appliance is dry before operation.
In case of complaint
•
You can claim the device within 24 months from date of purchase (receipt).
•
A free replacement or repair will be excluded from prior improper product handling.
•
Defects in wear parts, consumables, as well as cleaning, maintenance or replacement of said parts are
therefore with costs.
•
If you want to make a complaint, please bring the entire device in its original packaging and with proof of
purchase to your dealer. For a timely and convenient service register, visit our website
wellness.de and learn more.
•
Without a proof of purchase, generally there will be no repair or replacement.
•
In the event that the complaint case is analogous to our terms of service, all defects of the device or its
accessories due to material or manufacturing defects will be eliminated by repair or, at our discretion,
replacing the unit.
•
The damage of accessories does not automatically lead to a free exchange of the whole device. In these
cases, please contact your dealer. Glass breakage, or breakage of plastic parts are always to charge.
•
The dealer or repair service can perform the repair after the expiration of warranty against charge.
SUNTEC WELLNESS GMBH / HOLZSTRASSE 2 / 40 221 DÜSSELDORF / GERMANY
© 2022 KLIMATRONIC
®
Heat PTC 500 plug-in
www.suntec-