Suntec Wellness KLIMATRONIC Heat PTC 500 plug-in Mode D'emploi page 10

immediate surroundings of a bath, shower or
swimming pool.
• Do not use multiple sockets.
Warning: In order to avoid overheating, do
not cover the heater!
Components (1)
1. Control panel with LED display
2. Air outlet
3. Power plug
4. On/Off switch
5. Air inlet
6. LED night light
Operation (2)
•
Operating voltage: 220-240V~, 50/60Hz, 500W
•
Control panel:
1. Temperature +
2. On/Off
3. Temperature –
4. LED display
5. Timer
Note: The speed can be set by pressing the buttons „Temp.+" and „Temp.-" simultaneously.
•
Firstly, choose a suitable power socket for the appliance. The appliance should always be in an upright
position, so that the text on the control panel can be read. Please make sure that the distance between
appliance and floor is at least 15cm; and the distance between the appliance's sides and walls or other
objects at least 50cm.
•
Turning on the appliance:
Press the on/off switch at the appliance's side to position „I", then press the on/off button on the
o
control panel to turn on the appliance. The night light at the bottom of the appliance switches
on automatically with the unit.
•
Setting the temperature:
The desired temperature can be set between 15°C and 30°C using the "Temp. +" and "Temp. -
o
" keys. When the desired temperature is reached, the unit is automatically put into standby
mode. As soon as the temperature drops, the unit switches on again.
•
Speed:
To set the speed of the fan heater, press the "Temp.+" and "Temp.-" buttons. at the same time.
o
You can choose from two levels shown on the LED display: low level "LL" and high level "HH".
•
Timer for turning off the appliance:
Press the timer button while the appliance is in operation. The display now changes from the
o
temperature display to the hour display. Please press the timer button until your desired time is
shown. You can choose between 1 to 12 hours. When the time is over, the appliance switches
off.
•
Timer for turning on the appliance:
Press the timer button while the appliance is switched off. Please note that the on/off switch on
o
the appliance's side should be set to "I". The display now changes from the temperature display
to the hour display. Please press the timer button until your desired time is shown. You can
choose between 1 to 12 hours. After the time has elapsed, the appliance switches on.
•
Turning off the appliance:
To turn off the appliance, press the power button on the control panel. The heating function
o
stops and a 60 second countdown appears on the display. During this time, the built-in fan
continues to run to cool down the components of the appliance. After the 60 seconds have
elapsed, the appliance switches off completely. Please set the on/off switch to "O" and then
remove the appliance from the power socket.
•
Overheating protection: