Reer 5006 SCOPI Manuel De L'utilisateur page 20

Chapter 1: Baby Monitor Function
Prepare Unit – Insert Battery
Alternatively, insert commercially available AAA alkaline
batteries (4 units) or 4 individual rechargeable Ni-MH
batteries.
DO NOT charge alkaline batteries, never place the
transceiver in the charger when using batteries. Do
not mix rechargeable and normal batteries!
Observe the polarity as printed inside the battery
compartment.
Remove the belt clip (pull spring and remove to top)
and open the battery compartment.
Insert a supplied battery pack in each unit (packed
separately).
The arrow on the battery pack indicates the direction
in which to insert:
The arrow shows up and the print must be
legible after insertion, as shown in the figure).
Connect one of the power adaptors with the base
station and connect to a 230V wall outlet.
Charge the unit for several hours (new batteries are
only partly charged ex factory).
Note: Never open or dismantle the supplied battery
pack!
4