Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8
Technical information
8.1
Technical data
Total weight:
Load capacity lift
Load distribution
against the drive- in direction
Effective lifting range of the lift Approx. 2.020 mm
Lifting time of lift
Lowering time of lift
Operating pressure with load
Motor capacity
Motor speed
Hydraulic pump
Pressure relief valve
Filling volume oil container
Hydraulic oil
Noise level
Operating voltage
On-site connection
Optional energy set Pneumatic
connections for compressed air
Socket
68
1470 kg
5000 kg
Max. 3:1 or 1:3 in or
Approx. 40 s with
4.800 kg load
Approx. 19 s with
4.800 kg load
Approx. 270 bars
3 kW
2880 rpm
2.7 cm³/s
Approx. 290 bars
Approx. 10 litres
HLP 32
≤ 70 dB(A)
3 x 400 V, 50 Hz
3~/N+PE, 400 V, 50 Hz with
16 A fuses, slow, according
to VDE regulations
6-10 bar
220 V/50 Hz
8.2
Safety devices
• Deadman controls
Lift movement stops when the operating lever is
released.
• Main switch with curtain lock device
Fuse to prevent unauthorized use.
• Over-pressure valve
Hydraulic system fuse against over-pressure.
• Check valve
Secure
the
vehicle
lowering.
• Two independent cylinder systems
Each
with
a
command,
Secure against unauthorized lowering of the lift.
• Lifting arm block
Secures the lifting arm against horizontal move-
ment in a lifted condition.
• Foot bumper (optional)
Secure against shear and crushing points in the
foot area of the lifting arm.
• CE stop and warning signal (optional)
Secure against shear and crushing points in the
foot area of the lifting arm.
• Operating lever with curtain lock device
Fuse to prevent unauthorized use.
Version 1.0
20110002 POWER LIFT HL 2.50 NT - HYMAX HL 5000 PH OPI
against
unauthorized
follow
system.
Publicité
Table des Matières
