Nussbaum POWER LIFT HL 2.50 NT Manuel D'exploitation page 48

ENGLISH
1 Introduction
Nussbaum products are a result of many years of
experience. A high quality standard and superior
concept guarantees you reliability, long lifetimes
and economical operation. To prevent unneces-
sary damage and hazards, read this operating
manual carefully and always comply with its con-
tents.
Any other use, or use beyond purpose is
!
considered improper.
Otto Nußbaum GmbH & Co.KG is not liable for
!
any resulting damage. The operating company
alone carries the risk.
Proper use also includes:
• adherence to all instructions in this operating
manual and
• compliance with inspection and maintenance
work and the inspections stipulated
• the operating manual is to be followed by all per-
sonnel working on the lift. This is notably with re-
gards to Section 3 "Safety conditions"
• in addition to safety information from the operat-
ing manual, comply with rules and regulations at
the location of use
• proper lift handling
Operating company obligations:
The operating company is obliged to only permit
personnel to work on the lift who
• understand the principle regulations about work
safety and accident prevention and who have
been trained in working with the lift
• have read the safety section and warning infor-
mation in this operating manual, have under-
stood it and confirmed learning with a signature
Hazards in working with the lift:
Nussbaum products have been designed and built
to state-of-the-art and to recognized safety stan-
dards. However, improper use may lead to hazards
to life and limb of the user or result in property dam-
age.
The lift may only be operated
• for proper intended use
• if it is technically in perfect condition
Organizational measures
• The operating manual is always to be kept ready
at the location of use of the lift.
• Supplemental to the operating manual, refer to
and comply with generally valid legal and other
binding regulations for accident prevention and
for environmental protection.
• Check occasionally that personnel have an
awareness of hazards and safe work in compli-
ance with the operating manual!
• Use personal protective equipment as needed or
required by regulations.
• All safety and hazard information on the lift is to
be kept in a legible condition!
• Replacement parts must meet technical specifi-
cations of the manufacturer. This is only guaran-
teed for original parts.
• Deadlines pre-set or given in the operating man-
ual for repeating tests / inspections must be fol-
lowed.
Maintenance work, error removal
• Comply with
maintenance and inspection work and intervals
in the operating manual, including details for
exchanging parts / part fittings!
These activities may only be done by specialists
who have participated in a special factory train-
ing.
Guarantee and liability
• In principle, our "General sales and supply
conditions" apply.
Guarantee and liability claims for personal and
property damage are excluded if due to one or
more of the following causes:
• Improper use of the lift.
• Improper assembly, commissioning, operation
and maintenance of the lift.
Original
pre-determined setting,