Technical Data - TYROLIT Hydrostress DME16PW Série Notice D'utilisation

3. T E C H N I C A L D E S C R I P T I O N
The DME16PW***/20PW*** are universal core drills with water supply. They can be used manually as
well as in a stand (3) (drilling hand-held or by stand). They are suitable for drilling rock, concrete and
masonry.
The DME20PU*** is an universal core drill, which may be used wet (with water supply, adapter 1a) as
well as dry (with dust exhauster, adapter 1b). It is used especially as a hand-held machine, but it can also
be used in a drill stand (3).
The DME20CW*** is a core drill with water supply. It can only be used when fixed to a drill stand (drilling
directed by stand).
The material that is loosened by drilling is washed away by water provided through the diamond core bits
(4). The supply of water can be controlled by the ball valve (1a). At the same time, the tool is cooled (wet
drilling).
The boring tool (4) consists of a tube with an appropriate tool adapter G ½" , or 1 1/4" UNC, and with
soldered-on or welded-on diamond segments.
In case of wet drilling it is possible to suck up the water again with a vacuum cleaner through a water-
collecting ring (5).
The machine may not be used for a different purpose or with a different tool.
ATTENTION: Avoid wet drilling upwards (overhead drilling). If it is indispensable use
absolutely a perfect, all right and functioning water-collecting ring.
Only for DME20PU***: By exhausting the removed material through the drill bit and the hose coupling
(1b) with a vacuum cleaner, the tool is cooled, too (dry drilling only possible in masonry)
3.1

Technical Data

Type
Rated Voltage
Rated Current
Power input
Power output
Frequency
Rated Speeds (Rated Load)
Speed (no load)
Drilling drill rig/concrete
Drilling hand-held/concrete
Drilling hand-held/masonry
Weight
Tool fixture
Operating data
Gear/Speed
Release Torque/Safety Clutch
Core bit diam. concrete
Water volume approx.
DME16
V 110
A 15
W 1600
W 1080
Hz 50 - 60
1/min 580/1400/2900
1/min 1000/2300/4700
mm 15 - 130
mm 15 - 80
mm 20 - 150
DME16PW***: 5,9
kg
G ½", 1 1/4" UNC + G ½"
1/min
Nm
mm
l/min
10
DME20
110
18,6
2000
1340
50 - 60
540/1200/2520
900/1900/3900
20 - 180
20 - 100
20 - 180
DME20/PW /CW***: 5,9
DME20PU***: 6,3
1/580/540 2/1400/1200
58 25
65 - 130 30 - 55
1 0,7
3/2900/2520
12
15 - 25
0,5