Renfert Vibrax Mode D'emploi page 19

7 Error List
Error
The device generates no vi-
brations.
No difference in the vibration
intensity between the switch
settings Fine / Coarse.
No function in coarse oscil-
lation mode.
No function in fine oscilla-
tion mode.
No effect at the different
power level settings.
Device extremely loud
during operation.
8 Technical Data
Mains voltage:
Power consumption:
Device fuse *):
Dimensions (W x H x D):
Weight:
*) Fuse in accordance with IEC60127
9 Warranty
Provided the unit is properly used, Renfert warrants the all components of the Vibrax for a period of
3 years�
Warranty claims may only be made upon presentation of the original sales receipt from the authorized
dealer�
Parts which are subject to natural wear and tear (wear parts) and consumables are excluded from the
guarantee� These parts are marked in the spare part list�
The warranty is voided in case of improper use; failure to observe the operating, cleaning, maintenance,
and connection instructions; in case of independent repairs or repairs by unauthorized personnel; if spare
parts from other manufacturers are employed, or; in case of unusual influences or influences not in com-
pliance with the utilization instructions�
Warranty service shall not extend the original warranty�
Possible cause
• Power cord not properly
plugged in at the device�
• Blown fuse�
• No power at the wall outlet�
• Faulty diode (short circuit)�
• Faulty diode (interruption)�
• Faulty switch�
• Faulty switch connection wiring�
• Faulty switch�
• Faulty switch connection wiring�
• Faulty switch�
• Faulty switch connection wiring�
• Loose internal components�
• Loose rubber mat�
230 V, 50 Hz / 220 V, 60 Hz
275 x 140 x 220 mm (10�8 x 5�5 x 8�7 inch)
- 7 -
Corrective action
• Check that the power cord is se-
curely seated in the socket�
• Replace the fuse (refer to
Sec� 3�4)�
• Test the wall outlet for power�
• Return the device for service�
• Return the device for service�
• Return the device for service�
• Return the device for service�
• Return the device for service�
• Attach the rubber mat correctly
(see Chap� 1�2)�
120 V, 60 Hz
100 V, 50 Hz / 60 Hz
185 VA (230 V)
170 VA (120 V / 220 V)
190 VA (100 V)
2 x 1,6 A (T)
6,4 kg [14�1 lbs]
EN