Extension Cords - Waring Commercial WW250X2 Mode D'emploi

12. Extreme caution must be used when moving an appliance
containing hot oil or other hot liquids.
13. Always begin by plugging appliance into wall outlet. To
disconnect, turn control to setting 1, switch toggle to off
position, then remove plug from wall outlet.
14. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, REPAIRS SHOULD BE MADE ONLY BY AUTHORIZED
PERSONNEL. DO NOT REMOVE THE BASE PANEL. NO
USER-SERVICEABLE PARTS ARE INSIDE.
15. T o acquire a digital instruction manual, go to
www.waringcommercialproducts.com/resources
SAVE THESE INSTRUCTIONS
APPROVED FOR COMMERCIAL USE
Model
WW250X2
WW250BX2
For your protection, this appliance is supplied with a molded 3-prong
grounding-type plug and should be used in combination with a
properly connected grounding-type outlet. Use of any other voltage
or altering of the plug or cord may damage the unit, will void the
warranty and may cause injury.
WARNING – FOR USE ON INDIVIDUAL BRANCH CIRCUIT ONLY.
Caution: Before using an adapter, it must be determined that the
outlet cover plate screw is properly grounded. If in doubt, consult a
licensed electrician. Never use an adapter unless you are sure it is
properly grounded.
NOTE: Use of an adapter is not permitted in Canada and Europe.

EXTENSION CORDS

Use only 3-wire extension cords that have 3-prong grounding-type
plugs and 3-pole cord connectors that accept the plug from the
appliance. Use only extension cords that are intended for indoor
use. Use only extension cords having an electrical rating not less
than the rating of the appliance. Do not use damaged extension
cords. Examine extension cord before using and replace if damaged.
Do not abuse extension cord and do not yank on any cord to
disconnect. Keep cord away from heat and sharp edges.
Voltage
120V
208V
3
Power
2400W
2700W
Plug Type
5-20P
6-15P