Dimplex DF2024L Mode D'emploi page 8

Fireplace Installation
place for securing and using the
Figure 2
provided L-bracket and the screw
that was removed attach the fire-
box to the mantel. (Figure 2)
!
NOTE: There are no guide
holes provided for the L-Brackets
in the mantel.
If not installing the unit into a Dim-
plex mantel the required opening
dimensions of the fireplace are:
Figure 3
21 ¼ in. (540 mm) wide x 21 ⅝ in.
(550 mm) high x 7 ¼ in. (184 mm)
deep (Figure 3).
The firebox is to be installed
21 ⅝ in.
from the front of the mantel and
(550 mm)
inserted so that the flanges are
flush against the front surface of
the mantel.
21 ¼ in.
(540 mm)
7 ¼ in.
(184 mm)
8 www.dimplex.com