Preparation - Schou Day 751081 Manuel D'instructions

DIGITAL INDOOR/OUTDOOR THERMOMETER WITH CLOCK
Introduction
In order to get the most from your new
digital indoor/outdoor thermometer with
clock, please read through this user manual
before using it. We also recommend that you
save the instructions in case you need to
refer to them at a later date.
Technical data
Receiver:
Power supply:
Dimensions:
Transmitter:
Power supply:
Dimensions:
Frequency:
Maximum transmission power:
Range: approx. 60 metres (unobstructed)
Temperature unit:
Functions: Clock, indoor and outdoor
temperature and memory for minimum and
maximum temperature
14
2×1.5 V AAA batteries
(not included)
60×90×22.5 mm
2×1.5 V AAA batteries
(not included)
56×90×23 mm
433.00 – 434.79 MHz
10 dBm
C/F
Thermometer buttons
1. In/Out: Switches between displaying
indoor and outdoor temperature
2. MEM/+: Displays and resets the minimum
and maximum recorded temperature and
changes the value when setting the time
3. SET/C/F: Sets the time and switches
between Celsius and Fahrenheit
temperatures

Preparation

Open the battery cover on the transmitter
and insert 2 x 1.5 V AAA batteries. Check that
the batteries are correctly aligned, as shown
in the battery compartment. Select the
temperature unit using the C/F button in the
battery compartment. Replace the battery
cover.
Open the battery cover on the receiver and
insert 2 x 1.5 V AAA batteries. Check that
the batteries are correctly aligned, as shown
in the battery compartment. Replace the
battery cover.