Computerinstructions; Program Selection And Value Presetting; Computer Functions - Skandika Fitness Foldaway X-2000 Instructions De Montage Et Mode D'emploi

Computerinstructions

Mains connection
The computer gets its power supply by the included adaptor (33). The adaptor will be connected to a
normal mains plug (European standard, please check the speci cations resp. please use a tting mains
adaptor for your power system) and to the little plug in the cover of the device as it can be seen on the
previous page.

Program selection and value presetting

1. Press UP/DOWN keys to select workout mode and ENTER to con rm.
2. In manual mode you may use UP/DOWN to preset TIME, DISTANCE, CALORIES or PULSE.
3. Press START/STOP to exercise.
4. If a preset value is reached, computer will emit an acoustic sound.
5. If more than one preset value is set, press START/STOP to proceed exercising until the next
preset value is reached.
This computer has an automatic on/off function so that it switches on when the pedals move or when
any button is pressed and turns into stand-by mode automatically if no signal has been received for
approx. 4 minutes.

Computer functions

TIME
Computer shows actual exercise time (max. 99:59 Min.). When no target value has been entered, the
time will count up from 0:00.
Preset a target time: You may preset a target time before starting a workout. The time will then count
down and multiple sound beeps will be emitted when reaching 0:00.
DISTANCE
The workout distance is displayed here (max. 999 km).
RPM
Computer shows the rounds per minute ("RPM") here.
SPEED
The computer shows the current speed in the display (km/h).
CALORIES
The currently burned calories (approximately) are displayed here.
PULSE
The computer is showing the user's heart rate in beats per minute. For a correct display please ensure
that you fully grasp the hand sensors. It may last up to 2 minutes before the pulse frequency will be
measured correctly.
34