Uline H-9851 Mode D'emploi page 2

2. Locate the teardrop-shaped hole on upper portion
of utility hook. Position bottom portion of this hole
over screw head. Pull down hook so screw is seated
at top of teardrop hole. Finish tightening screw.
(See Figure 2)
Figure 2
3. Insert screw into hole directly below top hook and
fully tighten. (See Figure 3)
Figure 3
PAGE 2 OF 6
ASSEMBLY CONTINUED
4. Repeat steps 1-3 with two screws and remaining
5. Cover screw tips on back of cart leg with rubber end
1-800-295-5510
uline.com
utility hook on opposite leg of cart. (See Figure 4)
Figure 4
protectors. (See Figure 5)
Figure 5
1121 IH-9851