Table des Matières
Publicité
How to use this instruction
leaflet
Understanding this manual
Symbols and their descriptions
Safety information
Remaining risks according to ISO EN
12100-2
Safety decals
Intended use
Safety information
➢ Please keep a copy of the instruction leaflet.
➢ Read the instruction leaflet and the safety information before operation.
Indicates important safety rules which must be followed!
Indicates an important comment.
■
The assembly device complies with current safety standards. However, there are
remaining risks.
■
Other remaining risks are indicated by the safety decals and in the following safety
rules. It is therefore absolutely necessary to follow all safety instructions carefully.
Read the instruction leaflet and the safety information in full before opera-
ting the assembly device
Only one person at a time should operate the machine.
Do not adjust by hand or using tools in the area of the clamping cylinder -
RISK OF CRUSHING!
Wear appropriate eye and face protection when operating this machine.
The intended purpose of the assembly device is the pressing of LEGRABOX dra-
wers. The assembly device should only be used in manufacturing. The manufacturer
does not assume liability for other uses not described in the instruction manual.
■
Disconnect the assembly device from the compressed air before retooling or per-
forming any work in the area of the pneumatic unit.
■
You should always check that all safety devices are functioning properly before
use. Replace damaged parts with original Blum parts.
■
CAUTION: For your own safety, use only those accessories which are recommen-
ded or indicated in the manual or Blum sales literature.
■
Do not make any alterations or modifications to the assembly device.
■
If there are any questions and/or problems, please contact the BLUM Customer
Service Department.
EN
3
Publicité
Table des Matières
