Honda Power Products HSS622 Manuel De L'utilisateur page 25

Handle height adjusting bolt
The handlebars can be set in the high, low or middle position to suit the
operator. To change handlebar height, remove the right and left
adjusting bolts, align the bolt holes for the desired handlebar height,
and reinstall the bolts. Tighten the nuts securely.
Skid plate, scraper
Adjust the skid plates and scraper for the auger housing ground
clearance best suited to your snow removal conditions. (See page 36)
SCRAPER
22
HANDLE HEIGHT
ADJUSTING BOLT
SKID PLATE