Publicité
Les langues disponibles
Les langues disponibles
EN
This manual contains important information that should be kept
for future reference.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the
plastic bags out their reach. The small parts pose a choking hazard.
Materials
Cover: 49% polypropylene, 47% polyester, 4% cotton.
Coating lumbar cushions: 53% acrylic, 40% polyester, 7% viscose.
Structure seat: birch plywood.
Padding of the structure: multilayer polyurethane foam (4 cm of
30 kg/m
3
, 1 cm of 25 kg/m
3
and 1 cm of 18 kg/m
Padding of the back cushions: 50% silicone balls, 50% multilayer
polyurethane foam (14 cm of 25 kg/m
Padding of seat cushions: polyurethane foam 35 kg/m
Padding of the armrests: multilayer polyurethane foam (3 cm of
30 kg/m
3
, 1.5 cm of 21 kg/m
3
and 1 cm of 18 kg/m
Padding lumbar cushions: 50% silicone balls, 50% multilayer
polyurethane foam (14 cm of 25 kg/m
Seat Suspension: spring.
Feet: polypropylene
Assembly Instructions
Before starting the assembly, identify all components using the
manual.
In order not to misplace components, do not discard the packaging
until complete assembly is completed.
This product must be mounted by an adult.
Plan to assemble the furniture as close to the installation location
as possible.
Mount on a clean, level surface.
Be careful of the risk of pinching / jamming when assembling the
different parts of the sofa.
Recommendations for use
This product was designed for indoor use only.
Do not stand on the product.
Do not sit on the armrests.
Beware of sharp objects.
Maintenance
Vacuum or brush the cloth once a week. Dust accumulation
accelerates wear and the colors from fading.
Spills should be removed immediately with a clean and dry
dabbing to absorb the liquid. Do not rub, it may damage the fabric.
Variations in color between the surfaces cleaned and uncleaned
might appear. Avoid direct and prolonged exposure of the product
to sunlight. The colors may fade.
Do not place the product near a heat source (radiator, fireplace...)
nor a moisture source. The heat and humidity can damage the
product.
Do not use abrasives.
If in doubt, contact a professional to carry out cleaning.
Harold - 10/2022
3
).
3
and 3 cm of 30 kg/m
3
).
3
.
3
).
3
and 3 cm of 30 kg/m
3
).
Keep the label with lot number, it may be useful in case
BC
of complaint.
If you have any comments or suggestions regarding this product,
assembly instructions or service received, please enquire at your
nearest store or contact us on our website at: www.habitat-design.
com or write to this address: HABITAT, 70 AVENUE VICTOR HUGO,
93300 AUBERVILLIERS FRANCE.
The packaging elements are to be sorted out according to local
requirements. Make the right sorting choice and give them a
second life!
By sorting out this manual you contribute in preserving
the environment. This manual can still be found on
www.habitat-design.com.
2
Publicité
