Télécharger Imprimer la page

turbionaire SMART 8 eco Mode D'emploi page 16

Masquer les pouces Voir aussi pour SMART 8 eco:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 84
Each time you press this button, the value increased 1 hours and then the corresponding
timing value is displayed on the screen. The setting value is "0" to cancel the timer function.
The indicator turns out. After the timer is set and completed, the timer LED is on during the
timing period. After the timing is over, the timer LED turns off automatically.
In the running state, set the time to turn off the machine;
In the standby state, set the time to turn on the machine.
HUMIDITY SET ADJUSTMENT
Touch the humidity button to check the current environment humidity, touch this
button again and you can set the humidity. The range of target humidity is
80%-75%-65% ... 40%-35%-30%. After setting 3 seconds, the system confirms the
input value and then the machine exits the setting state, and returns the current humidity.
In the drying mode, the target humidity cannot be changed.
FAN SPEED
In automatic dehumidification mode (AUTO) and drying mode (CONTINUOUS),
press this key to change the speedFan: Low Speed / High Speed. For proper
operation of the appliance, the fan operates continuously until it stops.
INTERNAL DRYING FUNCTION
Press the INSIDE DRYING key to start the internal drying function before turning
off the unit. This feature prevents mold formation inside the device due to
moisture remaining after it has stopped.
DISPLAY
in automatic dehumidification mode (AUTO) or in textile drying mode
(CONTINUOUS), it will indicate the actual room humidity, the humidity set, and in
TIMER mode will indicate the time set in hours.
WATER TANK FULL ALARM – Drainage Manually
Water Tank Indicator
When the water tank is full (the water level indicator in the reservoir can be visually viewed
at any time), until it is drained, the unit will stop running under the action of the float in the
tank, a beep will sound 10 times briefly, and the message "FL" and the red LED tank LED full
will be displayed. Remove the water tank from the device and empty it from the water.
Reinstall the water drain tank and the dehumidifier will restart.
Clear the alarm
When the buzz is on, press any button to stop it. The compressor and the fan shut down and
all the functions freeze until the water tank is emptied and back in right position.
16

Publicité

loading

Ce manuel est également adapté pour:

Smart 10 ecoSmart 12 ecoSmart 14 ecoSmart 16 eco