Belkin F5D5131-16 Mode D'emploi page 16

Information
Safety Compliance
Please read the following safety information carefully before installing the
Switch:
Warning: Do not plug a phone-jack connector into the RJ45 port. This may
damage this device.
Warning: This product does not contain any user-serviceable parts.
Warning: When connecting this device to a power outlet, connect the field
ground lead on the tri-pole power plug to a valid earth ground AC-outlet
line to prevent electrical hazards and to comply with international safety
standards. The appliance coupler (the connector to the unit and not the
wall plug) must have a configuration for mating with an EN 60320/IEC
320 appliance inlet. The socket outlet must be near to the unit and easily
accessible. You can only remove power from the unit by disconnecting the
power cord from the outlet.
Caution: Use only twisted-pair cables with RJ45 connectors that conform
to FCC standards.
Wear an anti-static wrist strap or take other suitable measures to prevent
electrostatic discharge when handling this equipment.
This unit operates under SELV (Safety Extra Low Voltage) conditions
according to IEC 60950. The conditions are only maintained if the
equipment to which it is connected also operates under SELV conditions.
16 16