Belkin F5D5131-16 Mode D'emploi page 13

Troubleshooting
Power and Cooling Problems
If the power indicator does not turn on when the power cord is
plugged in, you may have a problem with the power outlet, power
cord, or internal power supply as explained in the previous section.
However, if the unit powers off after running for a while, check for
loose power connections, power losses or surges at the power
outlet, and verify that the fan on the right side of the unit (F5D5131-
24) is unobstructed and running prior to shutdown. If you still
cannot isolate the problem, then the internal power supply may be
defective.
Installation
Verify that all system components have been properly installed. If
one or more components (e.g., the power cord or network cabling)
appear to be malfunctioning, test them in an alternate environment
where you are sure that all the other components are functioning
properly.
You can find additional support information at www.belkin.com/
networking or www.belkin.com through the tech-support area.
If you want to contact technical support by phone, please call 877-
736-5771. Technical support is available 24 hours a day, 7 days a
week.
Before you Call
If possible, turn on your system before you call Belkin for technical
assistance and call from a telephone at or near the computer. You
may be asked to describe detailed information during operation.
13 13
1
2
3
4
5
6
7
8