ASROCK B660M-HDVP/D5 Mode D'emploi page 28

2.7 M.2_SSD (NGFF) Module Installation Guide (M2_1)
The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and
versatile card edge connector that aims to replace mPCIe and mSATA. The Ultra M.2
Socket (M2_1, Key M) supports type 2242/2260/2280 SATA3 6.0 Gb/s & PCIe Gen3 x4 (32
Gb/s) mode.
* If M2_1 is occupied by a SATA-type M.2 device, SATA3_0 will be disabled.
Installing the M.2_SSD (NGFF) Module
C B A
No.
Nut Location
PCB Length 4.2cm
Module Type Type2242
3
2
1
1 2
A B
6cm
Type2260
Step 1
Prepare a M.2_SSD (NGFF) module
and the screw.
Step 2
Depending on the PCB type and
length of your M.2_SSD (NGFF)
module, find the corresponding nut
location to be used.
3
C
8cm
Type 2280
B660M-HDVP/D5
H610M-HDVP/D5
25