Adjusting Needle Thread Tension - ELNA eXperience 620 Mode D'emploi

q
w
e
Adjusting the Needle Thread Tension
Choosing the Correct Tension — Straight Stitch
The ideal straight stitch will have threads locked between
the two layers of fabric, as shown left (magnified to show
detail). Needle thread tension can range from 3 – 5 and
is normally set on 4. Align the 4 on the dial with the
setting mark q.
If you look at the needle thread w (top thread) and
bobbin thread e (bottom thread), you will notice that
there are no gaps. Each stitch is smooth and even.
Occasionally the needle thread tension needs to be
adjusted to a manual setting. Examples:
• stiff or heavy fabric
• sewing more than two layers of fabric
• type of stitch
• thread
When adjusting needle thread tension, the higher
numbers tighten, the lower numbers loosen.
Tension is too tight
The bobbin thread shows through on the topside of the
fabric and it will feel bumpy.
Turn the dial to a lower number to loosen the needle
thread tension.
Tension is too loose
The needle thread shows through on the underside of
the fabric and it will feel bumpy.
Turn the dial to a higher number to tighten the needle
thread tension.
Adjusting Tension for Zigzag and Satin Stitches
The upper thread tension should be slightly looser when
sewing a zigzag or a satin stitch. The upper thread
should appear slightly on the underside of the fabric.
10