Illustr. 16:Connection With "Unibox Rla - oventrop Unibox T RTL Notice D'utilisation

Appendix
QUESTION
38
RESPONSE
- The volume flow and pressure loss may increase.
- Observe the pressure loss and noise characteristic line of
the radiator fittings.
- Adjust the bypass valve so that a sufficient amount of water
flows through the surface temperature balance circuit.
- No noise must be perceivable when the valve is closed.
Option 3:
1
Illustr. 16: Connection with "Unibox RLA"
(1) Bypass valve
(2) "Unibox RLA"
- The volume flow and pressure loss may increase.
- Observe the pressure loss and noise characteristic line of
the radiator fittings
- Adjust the "Unibox RLA" bypass valve so that a sufficient
amount of water flows through the surface heating system.
Unibox T RTL
2
102273380-V01.06.2019