USIng thE MIcRoPhonE
Kick drum:
Be sure to switch the preattenuation pad in (-20 dB)
because the kick drum may produce extremely high
sound pressure levels.
Place the microphone right inside the shell.
For a dry, "click" type sound with lots of attack,
position the microphone near the head, at an angle of
45 degrees.
For a fatter sound, place the microphone closer to the
front head or outside the shell, up to 6 in. (15 cm) from
the opening in the front head.
C314 MANUAL
clEAnIng
Microphone
Windscreen
60
C314 MANUAL
5
Cleaning
5.1
Microphone
Use a soft cloth moistened with water to clean the
surface of the microphone body.
5.2
Windscreen
Wash the foam windscreen in mild sudsy water. Do not
use the windscreen before it has dried completely.
61