Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTION MANUAL
Battery replacement
Remove the probes from any testing point, when opening the Battery case. Bat-
teries are dead when the continuity test with both test probes connected cannot
be done anymore. A battery symbol in the LCD indicates low battery.
If the instrument operation is impaired, carry out the battery replacement.
1. Disconnect the instrument from measurement circuit.
2. Open the casing by loosen the screw.
3. Insert 2 new batteries type AAA by respecting the polarity and close the casing.
Please think of our environment when you dispose your used batteries. They belong in
a rubbish dump or a refuse collection place for hazardous waste.
Remove the battery when not using the instrument over a long time period.
However, should the instrument be contaminated by leaking batteries, return the
instrument for cleaning and inspection to the factory.
20
Publicité
