Wiha 45222 Mode D'emploi page 16

The continuity tester 45222 is appropriate for continuity testing of electronic wiring, line
networks, systems, instruments and components of a measurement impedance of
500 kΩ. It has 2 ranges, up to 10 Ω and up to 500 kΩ.
The instrument is equipped with an additional incorporated torch function with steady
burning light, facilitating any testing in dark switch cabinets or in case of diffuse lighting.
• Acoustic and optical continuity indication
• Torch function
• Resistance ranges 10 Ω and up to 500 kΩ
• Test current up to 20 mA (low range)
• Fixed mounted test leads with test probes
Scope of supply
• 1x Continuity tester 45222
• 2x AAA batteries
• 1x Instruction manual
Transport and storage
Please keep the original packaging for later transport, e.g. for calibration. Any transport
damage due to faulty packaging will be excluded from warranty claims.
Instruments must be stored in dry and closed areas.
In the case of an instrument being transported in extreme temperatures, a recovery
time of minimum 2 hours is required prior to instrument operation.
EN
15