Repeater Access (Full Keypad Model Only); Radio Check (Full Keypad Model Only) - Motorola CP200XLS Manuel De L'utilisateur

J
1 to enter menu mode
L M
2 or until RAD CALL
J
3 to select RAD CALL
L M
4 or until CALL ALT
J
CALL ALT
5 to select
L M
6 or to locate the desired ID in the
Radio Call List.
- or -
Enter a valid DTMF digit (0 – 9) to move to that
location in the list (Full Keypad Model only).
7 Press the PTT button to send the page.
8 When the page is completed,
K
until you exit menu mode.
REPEATER ACCESS (FULL
KEYPAD MODEL ONLY)
Use this feature to send DTMF tones to a
repeater.
1 Press and hold the PTT button and enter your
access code using the DTMF keypad.
2 Press and release the required DTMF buttons.
3 Release the PTT button.
RADIO CHECK (FULL KEYPAD
MODEL ONLY)
Radio Check allows you to determine if a radio
is within the range of the trunked system and
turned ON, without disturbing the user of that
radio. This feature can also be used when
attempts with Selective Call and Call Alert fail.
31
English