Uline H-5647 Mode D'emploi page 3

OPERATING ISSUE
Not priming
Not pumping
PAGE 3 OF 9
TROUBLESHOOTING
Ensure Teflon tape has been applied to all intake
threads. Wrap up to 6 times each.
Rotate handle backwards for slight intake to coat
mechanisms. If insufficient, turn discharge spout upside
down and feed liquid through pump back into drum.
If issues persist and user determines compatible with
drum contents and their intended application, can use
a PTFE Spray into discharge spout and flush (ex: WD40).
If low levels of liquid in drum, may require increased RPM
for intake.
1-800-295-5510
uline.com
RECOMMENDATIONS
0123 IH-5647