DITEC 52E Manuel D'installation page 15

CONTENTS
Ch. Topic ..................................................................................................................................... Page
1. CONNECTIONS ....................................................................................................................... 16
2. ADJUSTMENTS AND SETTINGS .......................................................................................... 17
3. ELECTRICAL CONNECTIONS
Smart Reset ................................................................................................................................ 18
Sector Reset .............................................................................................................................. 19
Smart Plus .................................................................................................................................. 20
Sector Plus ................................................................................................................................. 21
Traffic C ...................................................................................................................................... 22
4. LIMIT SWITCH ADJUSTMENT .............................................................................................. 23
5. TROUBLESHOOTING .............................................................................................................. 23
6. PROGRAMMING
6.1 Installation menu ................................................................................................................... 24
6.2 Advanced menu .................................................................................................................... 25
6.3 Timed opening menu ............................................................................................................ 26
6.4 Service menu ........................................................................................................................ 27
7. ALARMS ................................................................................................................................... 27
8. INTERLOCK ............................................................................................................................. 27
1. GENERAL SAFETY PRECAUTIONS
This installation manual is intended for professionally competent personnel only.
Installation, electrical connections and adjustments must be performed in accordance with Good Working Methods and
in compliance with the current standards.
Read the instructions carefully before installing the product. Incorrect installation could be dangerous. The packaging
materials (plastic, polystyrene, etc.) should not be discarded in the environment or left within reach of children, as they are
a potential source of danger.
Before installing the product, make sure it is in perfect condition. Do not install the product in explosive areas and
atmospheres: the presence of inflammable gas or fumes represents a serious safety hazard. Before installing
the door, make all the structural modifications necessary in order to create safety clearance and to guard
or isolate all the crushing, shearing, trapping and general danger areas.
Make sure the existing structure is up to standard in terms of strength and stability. The safety devices (photocells, safety
edges, emergency stops, etc.) must be installed taking into account current laws and directives, Good Working Methods,
the installation environment, the system operating logic and the forces developed by the motorised door or gate.
The safety devices must protect any crushing, shearing, trapping and general hazardous areas of the door. Display the signs
required by law to identify hazardous areas.
Each installation must clearly indicate the door identification data.
Before connecting the power supply, make sure the plate data correspond to those of the mains power supply. An
omnipolar disconnection switch with a contact opening distance of at least 3mm must be fitted on the mains supply.
Check there is an adequate residual current circuit breaker and overcurrent cutout upstream of the electrical system.
Connect the door to an efficient earthing system that complies with current safety standards. The door manufacturer declines
all responsibility if components not compatible with safety and good functioning are installed, or modifications of any kind
are made that have not been specifically authorised by the manufacturer. Use only original Ditec spare parts when repairing
or replacing products. The installer must supply all information concerning the automatic, manual and emergency operation
of the motorised door or gate, and must provide the user with the operating instructions.
Optional accessory
All rights reserved
The data given have been compiled and checked with the greatest care. We cannot, however, assume any responsibility
for any errors, omissions or approximations due to technical or graphical requirements.
C
Comfort Safety
- 15 -
T
Top Safety
EN
0DT866 10-05-2022