Troubleshooting - GreenWorks Pro STB80L01 Manuel De L'utilisateur

EN
Item
Battery storage temperature
range
Battery discharging tempera-
ture range
13

TROUBLESHOOTING

Problem Possible Cause
The ma- No electrical con-
chine does tact between the
not start machine and the
when you battery pack.
push the
trigger.
The battery pack is
depleted.
The lock-out but-
ton and trigger are
not pushed at the
same time.
English
Temperature
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
Solution
1. Remove battery pack.
2. Check contact and in-
stall the battery pack
again.
Charge the battery pack.
1. Pull the lock-out but-
ton and hold it.
2. Pull the trigger to start
the machine.
Problem Possible Cause
The ma- The guard is not
chine stops attached to the ma-
when you chine.
cut.
Heavy cutting line
is used.
Grass winds
around the motor
shaft or the trim-
mer head.
The motor is over-
loaded.
The battery pack
or machine is too
hot.
The battery pack is
disconnected from
the tool.
The battery pack is
depleted.
12
Solution
Remove the battery pack
and attach the guard to
the machine.
Use only with the nylon
cutting line of 0.095" /
0.080" (2.4 mm / 2.0
mm) diameter.
1. Stop the machine.
2. Remove the battery
pack.
3. Remove the grass from
the motor shaft and trim-
mer head.
1. Remove the trimmer
head from the grass.
2. The motor will recover
to work as soon as the
load is removed.
3. When you cut, move
the trimmer head in and
out of the grass to be cut
and remove no more than
8" in length of the grass
being cut per pass.
1. Cool the battery pack
until its function returns
to normal. This is best
done by bringing the bat-
tery into the shade or in-
doors.
2. Cool the machine for
approximately 10 mi-
nutes. Remove the bat-
tery from the tool to help
the tool cool down more
quickly.
Install the battery pack
again.
Charge the battery pack.