Transportation And Storage; Move The Machine; Store The Machine; Technical Data - GreenWorks Pro STB80L01 Manuel De L'utilisateur

3. Put the cutting line through the hole. Push the cutting line
until it exits the opposite hole.
4. Pull the cutting line through until there is an equal
quantity of cutting line on each side.
5. Turn the spool cap clock-wise to wind the cutting line
into the trimmer head. Keep approximately 5 in of cutting
line above out of each side of the trimmer head.
English
11 TRANSPORTATION AND
STORAGE
Remove the battery pack from the machine before

transportation and storage.

11.1

MOVE THE MACHINE

When you move the machine, you must:
• Stop the machine.
• Remove the battery pack.
11.2

STORE THE MACHINE

• Remove the battery pack from the machine.
• Make sure that children cannot come near the machine.
• Keep the machine away from corrosive agents such as
garden chemicals and de-icing salts.
• Secure the machine during transportion to prevent
damage or injury. Clean and examine the machine for any
damage.
12

TECHNICAL DATA

Type
Motor
No load speed
Cutting line diameter
Cutting path diameter
Feed Type
Weight (without battery
pack)
Battery model
Charger model
The recommended ambient temperature range:
Item
String trimmer storage tem-
perature range
String trimmer operation
temperature range
Battery charging temperature
range
Charger operation tempera-
ture range
11
WARNING
Cordless, battery powered
80V
5000 / 6000 (±10%) RPM
0.095" / 0.080" (2.4 mm /
2.0 mm)
14 in. /16 in. (35.6 cm / 40.6
cm)
Bump Feed
7.9 lbs (3.6 kg)
BAB727/2901302 and other
BAB series
GCH8020/GCH8040 and
other CAB series
Temperature
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
39°F (4°C) - 104°F (40°C)
39°F (4°C) - 104°F (40°C)
EN