Foundations Secure Sitter 4607247 Mode D'emploi page 2

Secure Sitter
™
TIP & SLIP PROOF FEEDING CHAIR
ASSEMBLY INSTRUCTIONS
• Adult assembly required
• Unpack carton, remove packaging materials,
safely dispose of properly or recycle where
possible.
WARNING
PREVENT SERIOUS INJURY OR DEATH FROM FALLS OR
SLIDING OUT.
THE CHAIR SHALL BE USED ONLY FOR A CHILD CAPABLE OF
SITTING UPRIGHT UNASSISTED.
MAXIMUM WEIGHT OF CHILD MUST NOT EXCEED 40 LBS (18 KG).
ALL OPERATING AND ASSEMBLY MUST BE PERFORMED BY
AN ADULT.
NEVER LEAVE CHILD UNATTENDED. ALWAYS KEEP CHILD IN
VIEW WHILE IN CHAIR.
CHILD SHOULD BE SECURED IN THE CHAIR AT ALL TIMES WITH
THE 3 POINT HARNESS SYSTEM. ALWAYS ADJUST HARNESS
PROPERLY TO THE SIZE OF THE CHILD.
TRAY IS NOT DESIGNED TO HOLD CHILD SECURE IN CHAIR.
NEVER LIFT OR CARRY HIGH CHAIR WITH CHILD IN IT
MAKE SURE ALL FASTENERS AND PARTS ARE SECURED TIGHTLY
AND CHECK THEM PERIODICALLY.
DISCONTINUE USE IMMEDIATELY IF ANY PARTS ARE DAMAGED,
BROKEN OR MISSING.
PLACE CHAIR ONLY ON LEVEL FLAT FLOOR SURFACES AND
AWAY FROM HAZARDS SUCH AS STAIRS, HEATERS, STOVES OR
DRAPERY CORDS. NEVER USE CHAIR ON A TABLE.
PREVENT SUFFOCATION AND DEATH: COMPLETELY REMOVE
ALL PLASTIC BAGS AND PACKING MATERIALS BEFORE USING
THIS PRODUCT.
RECORD PRODUCT INFORMATION
FOUND ON PRODUCT HERE:
Model Number: _______________________
Manufacture Date: _____________________
PO Number: __________________________
TODDLER SEAT ASSEMBLY
PARTS LIST
Part Description Part #
a Legs 7" 32200001
(model 4607247)
Legs 9" 32200002
(model 4609247)
b Seat Body 32200003
c Seat Back 32200004
d Tray 32200005
Crotch Restraint 32200008
e
STEP 1
A
Insert the Legs A into the Seat
Body B until you hear them click.
STEP 3
d
e
Snap Crotch Restraint e into
bottom of Tray d.
2
a
Qty
4
4
c
1
1
1
1
STEP 2
b
Snap the Seat Back c down
into the Seat Body b.
STEP 4
D
Inser t Tray/Restraint d/E
into Seat Body b at a slight downward
angle and click into place.
(remove the tray quickly & easily by pressing the triggers
underneath the tray and lifting up)
b
d
e
c
B
3