Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation
Step-3
Fit the motor unit to the standing pipe by installing the axle.
Step-4
Reinstall the screws on the both sides of the motor unit
bracket.
Step-5
Install and tighten the thumb screw to hold the motor in place.
3. Fit the fan grill on to the fan motor.
Step-1
Remove the 4 pieces screws from the fan housing.
Step-2
Fit the rear fan grill onto the fan motor. Make sure the 4
holes of the motor housing match the 4 holes of the rear
fan grill. Fit the 4 screws back on the fan motor housing.
Publicité
Table des Matières
