Features And Customisation; Multifunction Button; Functionality Of The + And - Buttons; Positioning Of Microphone - GN Netcom GN 9120 Guide D'instructions

Note: The battery charging indicator on the base unit will flash continuously during charging and be lit
when the battery is fully charged.

2. Features and customisation

Multifunction button

The multifunction button enables several functions, depending on how long the
button is pressed for.
Functions
Answer/make call*
End call*
Conference mode
Tone control adjustment
Low power mode on
(European versions only)
Low power mode off
(European versions only)
* Only with GN 1000 or EHS mode
Functionality of the + and – buttons
The + and – buttons enable several functions, depending on how long the button
is pressed for.
Functions
Volume +
Volume –
Mute / un-mute
Transmit volume
adjustment

Positioning of microphone

Adjust the boom arm of your headset so that the microphone is positioned
in the direction of your mouth, as close as possible to your mouth.
Note: The boom arm cannot be rotated a full 360 degrees. Do not force
the boom arm when it cannot be rotated any further.
Press momentarily
√
√
√
Press momentarily
√
√
√
"+"/"–" simultaneously to enter
mode, then "+" or – for adjusting
Press for 5 sec.
√
(MFB and "–" simultaneously)
√
(MFB and "+" simultaneously)
Press twice within 1 sec.
Press "–" twice within 1 sec.
Press for 6 sec.
√
√
3