Hayward ENERGYLINE PRO ENPI7M Manuel D'instructions Et D'installation page 49

1. GENERAL INSTRUCTIONS - SAFETY
We thank you for purchasing this Hayward swimming pool heat pump unit. The
Energyline Pro INVERTER was designed according to strict manufacturing
standards to meet the highest quality requirements. The Energyline Pro
INVERTER will offer you exceptional performance throughout the swimming
season by adapting its power, electricity consumption and sound level to your
swimming pool's heating needs with its INVERTER control logic.
This manual includes all of the necessary information concerning installation,
debugging and maintenance. Please attentively read this manual before opening
the unit or before carrying out any maintenance operations on it. The manufacturer
of this product will not, under any circumstances, be held responsible in the case
of injury to the user or damage to the unit resulting from improper installation,
debugging or unnecessary maintenance. It is essential to follow all of the
instructions specified in the manual at all times.
After having read this manual, keep it for future usage.
Authorised personnel
• The installation, electrical connections, maintenance and repairs of the device
must be carried out by an accredited professional in accordance with the
regulatory texts and the rules of the art in effect in the country where the
device is installed (see § 3.4).
For any intervention on the cooling circuit, the professional must hold a
certificate of competence in handling refrigerants.
For France:
- Low-voltage electrical installation according to NF-C 15-100.
- Legislation on the handling of refrigerants: Decree 2007/737 and its
implementation orders.
Installation and maintenance conditions
• Do not attempt to install this device by yourself.
• This product was designed exclusively for domestic use and installation
outdoors. The air that escapes from the product must be able to flow freely
and must not be used for other purposes such as heating or cooling a room or
building.
• This swimming pool heat pump unit heats swimming pool water and maintains
a constant temperature; it should not be used for any other purpose.
• Check the power cable. If the power cable is damaged, it has to be replaced
by the manufacturer, its after-sales service or by a qualified and authorised
person.
1