12. VERMICULITE INSTALLATION
Follow this procedure to install the vermiculite
sides and rear:
1.
Place the rear vermiculite.
2.
Remove the left screw holding the baffles.
3.
Place the left side by turning it on itself and
snapping it into the slot on the rear
4.
Turn the side to form a 90° angle to the rear.
5.
Repeat operations 2, 3 and 4 to place the
right side.
6.
The baffles now rest on the vermiculite
sides. There is no need to replace the
screws.
Remove the baffles to access the chimney from
inside the Stove. Follow the procedure below:
1.
Remove the screws holding the baffles
2.
Remove the baffles by turning them around
the vertical axis
3.
Repeat the procedure in reverse to reposi-
tion the baffles.
22