Sauder 423400 Mode D'emploi page 18

Step 14
We recommend using the FURNITURE TIPPING RESTRAINT KIT (99) for added stability. Fasten a bracket to the
å
center of the back edge of the TOP (E) and 1/4" down from the top edge using the 5/8" screw as shown.
Place your unit in its fi nal location against a wall.
å
Follow the instructions included in the KIT to fasten your unit to the wall.
å
Using your hammer, gently tap a CAM COVER (9) onto each visible HIDDEN CAM.
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story at Walmart.com or
Use the 5/8" screw through the
small hole in a bracket and into
the back edge of the TOP (E).
To cover HIDDEN CAMS
Page 18
Small hole
99
9
www.sauder.com
No load
E
25 lbs.
25 lbs.
30 lbs.
25 lbs.
40 lbs.
423400