Technical Characteristics - Trevi EC 880 Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

ENGLISH

TOOLTIP

1. AL/OFF, alarm off

2. HOUR button, increase in hours

3. MIN button, increase in minutes

4. SNOOZE/DIMMER button, tempora-

ry alarm off/display Dimmer

5. ALARM1 button, alarm1 adjustment

POWER SUPPLY

Plug the cord into any 230V

until the time won't set.

CLOCK SETTING

1. Press and hold the TIME (7) button for 2 seconds, the indication on the

display will start blinking; press the HOUR (2) button to set the hour.

2. Press the MIN (3) button to set the minutes.

3. Press the TIME (7) button to confirm the setting, the indication on the

display will remain fixed.

ALARM SETTING AND ACTIVATING

1. Press the button ALARM 1 (5), the indication on the display will start blin-

king; press the HOUR (2) button to set the alarm time.

2. Press the MIN (3) button to set the alarm minutes.

3. Press the button ALARM 1 (5), to confirm the setting. The display will turn on

the alarm indicator (8).

4. To set ALARM2 follow steps 1 to 3 by pressing the button ALARM 2 instead

of ALARM 1.

SNOOZE FUNCTION AND DISABLE ALARM

1. During the alarm sound, press the SNOOZE (4) button to momentarily stop

the alarm, the alarm indicator (8) will start flashing. After nine minutes the

alarm will sound again.

2. During the alarm sound, press the AL/OFF button (1) to permanently stop

the alarm. The alarm will remain active and will play 24 hours later.

3. Press the button twice ALARM1 (5) or ALARM 2 (6) to deactivate the corre-

sponding alarm. The display will turn off the corresponding alarm indicator

(8).

BATTERY BACK-UP

To keep the clock running and alarm storage even during a momentary power

failure, insert two "AAA" batteries into the battery compartment (10) on the

bottom. We recommend replacing these batteries every 6 months.

If in case of a blackout the monsters on the display unit and flashing the

wrong time to replace the batteries.