Charging - ANSMANN HS20RPRO Traduction Du Mode D'emploi Original

4.
4 Connect the USB cable to the Micro-USB connection on the wall
mount.
5 Press the USB cable firmly into the strain relief.
6 Screw the wall mount into place.
7 Connect the USB cable to a USB power source with at least 1.5 A
output current.

CHARGING

Option A: Insert the product into the wall mount.
Option B: Charge the product via the integrated
Micro-USB connection.
1 Open the rubber cap of the Micro-USB connection.
2 Connect a USB power source with at least 1.5A output current via
the USB cable provided.
3 After charging, remove the USB cable and close the rubber cap.
Mains failure electronics
• Start the charge process whilst the product is switched on.
• As soon as the product is supplied with power, it switches off.
• If the power supply is interrupted, the product will switch on
automatically with ca. 20% lighting power.
• If the power supply is restored, the product will switch off again.
5.
6.
15