Product Description; Mounting - ANSMANN HS20RPRO Traduction Du Mode D'emploi Original

− This product contains a non-replaceable lithium-ion rechargeable
battery. Do not throw the product into a fire.
− Always charge the product in an open and spacious area, away
from flammable materials and liquids.
− Disregard can result in burns and fires.
− Never try to open, crush or heat a rechargeable battery or set it on
fire.
− Do not use or charge the rechargeable battery if the product
appears to be damaged.
− Always dispose of used batteries & rechargeable batteries in
accordance with the local regulations and requirements.
PRODUCT DESCRIPTION (SEE PAGE 2)
1 Joint
2 Mode button
3 LED selection button
4 Status LED display
5 Mounting magnets
6 Charge contacts
7 Micro-USB connection with
rubber cap
8 Fastening holes
9 Charge contacts

MOUNTING

Note: Mounting only permitted in dry indoor
rooms.
1 Use the fastening holes to mark the
position of the holes to be drilled.
2 Drill the holes.
3 Insert the wall plugs.
Deutsch |
14
Svenska | Italiano | Nederlands | Dansk | Suomi | Norsk
10 Micro-USB connection
11 Strain relief
12 USB cable
13 Colour filter
14 Screws
15 Wall plugs
16 LED for close range
17 LED for medium range
18 LED for long range
English | Français | Español | Português
1.
2.
3.