Product Introduction; How To Use - Inateck FD1006C Manuel D'instructions

English

Product introduction

This unit breathes new life into your unused hard drive. It adopts USB3.0 (Super
Speed with UASP) with data transfer rates up to 5Gbps and SATA3 (6Gbps) and is
backward compatible with earlier versions as well. The product features excellent
transmission performance and good compatibility, which is convenient for data
exchange and perfectly suitable for those who need to batch processing and clone
data, such as film and television production, Backup & processing IT data, Schools,
batch processing data etc.
Product schematic
LED indicator
LED indicator
Power Switch
DC-IN Jack
USB3.0

How to use

a. Insert HDD into slot of docking station correctly.
b. Connect docking station with computer by USB cable
c. Connect DC power adapter with docking station
d. Power on, lower right comer of computer will have a mobile hardware prompt
after device recognized. It will also be shown in file manager.
Note
Before the removal of the data storage device , please stop all data access and
transfer to the device, so the storage can be normally removed. Forced removal may
lead to damage or loss of crucial data.