Technical Details
EWS MIC2 / MIC8
General
·
19" rack mounted external module for EWS88 MT PCI interface or ADAT interface cards
·
2 XLR/TRS combo plugs on front side, alternatively to input 7 and 8 on back side (auto
priority)
·
8 (2 with MIC2) high quality class A microphone amplifiers, developed in co-operation
with SPL™ Germany
·
Direct out setting on front side for all analog channels (monitoring)
·
High quality headphone DAC and amplifier for monitoring the mixed signal
·
2 separate MIDI-interfaces with 32 MIDI channels (only with EWS88 Vers. 2.0 PCI card)
·
Stand-alone operation mode (microphone pre-amp, ADAT interface)
·
Ground-Lift switch
·
Internal switch power supply for 240Volt/115Volt – 50Hz/60Hz
·
Weight: 3.435 kg -> MIC Module, 100 g -> EWS88 PCI card.
·
Dimensions: 482 x 44 x 245 mm
Analog
·
8 channel balanced analog inputs, XLR and 6,3 mm stereo jack
·
8 channel balanced analog outputs, 6,3 mm stereo jack
·
8 gain controls on front side for analog inputs
·
Input gain range, -17,8 dBu (100 mV) to +15 dBu (4,35 V)
·
8 blue input signal LEDs on front side
·
8 red clipping LEDs on front side (clipping at –1 dB full range)
·
24 bit/96 kHz A/D converters with 105 dB (A) SNR
·
24 bit/96 kHz D/A converters with 106 dB (A) SNR
·
Analog output +4dBu (max 20 dBu) / -10 dBv (max. 6dBu) setting
·
Line/Instrument input impedance, 100 kOhm (unbalanced), 200 kOhm (balanced)
·
Output impedance: 75 Ohm
Microphone Pre-Amplifier
·
Phase, low-cut and mute settings for each microphone channel
·
Low-Cut at 50 Hz, 40 dB / octave
·
48 Volt DC phantom power for each microphone channel
·
Input gain range, -37 dBu (10 mV) to +17 dBu (5,5 V)
·
Input impedance, 10 kOhm
MIC 2/8 (français)
51