Jeulin 488 060 Mode D'emploi page 10

Mechanics
Acceleration
Ref : 488 060
2.1 Wireless Mode (via Bluetooth)
If you use the windows 7, you have to install the driver by using the link below with your
activation key:
If you use the windows 10/11, the driver is installed automatically.
Insert Bluetooth adapter into the USB port, turn ON the accelerometer.
Figure 2 : Bluetooth adapter connected
If the accelerometer is paired with Bluetooth, the blue LED of sensor will flash and the
Bluetooth adapter LED will remain still.
2.2 Pairing
In order to be able to use several accelerometers in the same
room, the Bluetooth adapter is paired with the accelerometer.
Each of the 2 is provided with a label with its identifier. Be sure
to use the associated accelerometer/adapter pairs.
2.3 Battery charging mode
Up to 10 hours battery life. Rechargeable lithium-ion battery.
You have to connect accelerometer to computer with a USB-C cable in order to charge
the battery.
When the accelerometer is charging, the red LED will remain still, the light will switch off
once the charge is completed.
ENGLISH
www.jeulin.com/installweb
Figure 4 : Battery charging
10
Figure 3 : Accelerometer turn ON